POWERFULLY SUPPORT "FIRING TECHNIQUE" RESPONDING TO NEW MATERIALS


CERAMIC COMPUTER FA-2100

FULLY ADJUSTABLE
FULLY AUTOMATIC
PORCELAIN FURNACE

　

The firing of artificial tooth has been chiefly depending upon the dental technicians long experience and professional sense. UP to now ,the major problem was the irregularity in quality due to the difference in experience of dental technicians. Ceramic-Computer has made the firing know-how of veteran ceramist into computer software. The high-level firing of artifial tooth is realized by simple operation
FRONT VIEW　



NO ANXIETY AND SAFE DESIGN MUFFLE MOVING UP AND DOWN


Delicate concern and safe mechanism. prudent self control system
Even by slight vibration,breakage and cracking are caused on very delicate materials. But, stabilized firing can be done without vibration by the mechanism of muffle moving up and down. Also,firing can be executed without anxiety, as the controller of ceramic computer has many check-system (OK. MONITOR)

THE FIRING IS ALWAYS IN THE MUFFLE

Clean firing can be always performed with cartridge which is easily fixed and detached. The muffle is free from driving gear in mechanism. Accordingly, the accumulated gas in the muffle can be readily removed by reversing the muffle and firing emptiness

MUFFLE 　　 　　MUFFLE SET

ENERGY SAVING SPACE SAVING,IDEAL NEW MECHANISM

Mechanism of energy-saving and space-saving muffle. By adopting our originally developed Ceramic heater, thermal efficiency is so high that the consumption of electric power is lessened. (Quick heating and quick cooling are possible) Also,as it is free to lay muffle itself on the side of controller or to overlay muffle itself upon controller, the storage space is not limited.　
　SEPARATE USE


　　FRONT PANEL

　MEMORY OF MASS STORAGE ,APPLICATION SOFTWARE ARE CONTAINED.

Abundant storage of Memory enlarge further the area of combined firing of metal and ceramic materials. 100 standard programs for users to make change/amendment/addition possible ,and 100 programs specialized for communication. Furthermore, 100 recommended programs are installed. Thus,abundant total 300programs can respond to the combination of every ceramic materials and metals. In addition,special program for SOLDERING is mounted as standard.


ABUNDANT OPTIONS TAKING "NEEDS" IN ADVANCE

A. CONTAINED COMMUNICATORY FUNCTION WITH PERSONAL COMPUTER

As standard specification,RS-232C communication software is contained.By connecting with PC-9800 and so forth ,which are available by yourselves
it is possible to mergeprogram in the personal computer .
Furthermore ,it is possible to transmit to furnace and transmit information from furnace to personal computer.

B.EXCHANGE DATA WITH ELECTRONIC POCKET NOTEBOOK

Mutual exchange of data with "SHARP" electronic pocket notebook as well as data communication utilizing NTT circuit line by MODEM is possible.

Main Frame of Ceramic Computer

　

Cassette Recorder RS-232C Interface
Audio Cassette
Personal Computer
Printer

　　

Muffle

　

Elevator
Vacuum Pump (Sold separately)

PRINCIPAL SPECIFICATION
Dimension of structure portion: 230(W)X380(D)X220(H):10Kg
Dimension of Controller portion: 310(W)X415(D)X150(H):5Kg
Muffle set: 200(W)X220(D)X250(H):5Kg
Inner dimention of furnace: 88x90(H)
Power : AC100V 50/60HZ
Maximum temperrature for use: 1199ﾟc
Temperature rising rate: 0-200ﾟc/minute set by programming
Temperature control method:
program control of additional value,by micro computer.
Degree of vacuum inside furnace: 0-76cm/hg
set by programming.
Moored timer 0-99 minutes or 0-99 seconds
set by programming.

BACK